The DNSEAM_MISC is an expansion card that adds four separate USB3.0 channels to any GTX expansion slot. In addition, two channels of GTX are connected to SMAs and two GTX channels are connected to SATA III.
The high speed ‘3.0’ part of USB uses Xilinx GTX channels. To comply with the USB specification, USB2.0 is required also. Since Xilinx FPGAs do not contain a Phy capable of USB2.0, a separate SMSC USB3317 chip is installed for one of the USB3.0 channels. The other three USB2.0 links must be cabled in from a separate expansion card. The DINAR1 expansion cards or can be used to provide USB2.0 from the same FPGA that drives the USB3.0 ports.
Two sets of 4 SMA connectors enable 2 channels of GTX for any purpose. In addition, two SATA connectors provide an addition 2 channels of GTX.
Three oscillators provide a variety of reference clocks. One of four possible frequencies can be selected using jumpers:
B0: 312.5, 250, 200, or 156.25 MHz
A1: 100, 108, 125, or 150 MHz
A0: 100, 150, 250, 300 MHz
l 4 USB3.0 interfaces
Ø 1 Micro type ‘AB’ connector
l USB2.0 Phy is local with ULPI interface
Ø 3 Type ‘A’ connector
l USB2.0 Phy is cabled from external source
l 2 channels of GTX with SMA connectors
l 2 SATA III interfaces
l 3 fixed oscillators with jumper selectable frequencies
Ø B0: 312.5, 250, 200, or 156.25 MHz
Ø A1: 100, 108, 125, or 150 MHz
Ø A0: 100, 150, 250, 300 MHz